If it's Wednesday then it is time to Raise Your E-Notion IQ here at
IHAN. Am I the only one who thought today was Wednesday? Honestly....I was so focused on the
Yellow Monster that I didn't even realize Wednesday was yesterday. So...lets pretend today is Wednesday...just for the time that you are reading this post :)
Nick Coman
(Dragonfly Threads), the guy who was demonstrating the iron for
Kandi Corp at the Open House, told me the iron gets up to 425 degrees (linen setting). I thought that was impressive and I also liked the handle design, the weight (10 oz) and the fact that it is 110/120V and 220/240V by just turning a dial. All you girls in AU will be thrilled about that! Just use your adapter and you are good to go.
This is what
Kandi's Handi-Iron looks like out of the box.
The piece that looks like a nose guard for the iron slips off and guess what?
You just slip it under the black clip and that is the handle for the iron. Cool ay?
After I plugged it in, I turned the dial to linen (of course) but I realized I didn't know where the indicator was for setting the temperature Upon closer inspection, I found it....see the arrow and the line in the photo above....smack dab in the center of the iron...yep that's the one....that is the arrow that tells you where to stop the dial for your settings.
The first time I plugged in the
Handi-Iron it smoked. Nick told me it would. The smoke is from condensation inside the iron and it stopped after the first time I heated it up. I'm so glad Nick told me it would smoke....I would have thought something was wrong....nope...just burning off condensation.
Next....I need some very wrinkly fabric....so I wadded up some Kona Cotton.
I started ironing the very wrinkled Kona Cotton fabric....and.....
Wahhhh Lahhhhh....and you see....no more wrinkles. You know I was surprised and impressed.
Then it dawned on me that the
Handi-Iron was supposed to get up to 425 degrees. How on earth was I going to figure out how hot it gets? I only have a thermometer that takes human body temperatures...and this iron doesn'tave a tongue to stick it under. So I ran to the neighbors and asked if they had a cooking thermometer. This is the best I can do folks :)
Here is the neighbors thermometer (used for Thanksgiving I bet) cold.
Then I put it up against the
Handi-Iron and took pictures while the dial moved up ...remember it was on the highest setting.
The red dial kept going....and going....
and going.....
Before it stopped back where it started. I realize this thermometers not intended for irons and it stops at 190 degrees....but you will notice it kept going almost back around to the 130 mark again....which says to me this iron is pretty darn hot. My hands could tell it was pretty dog gone hot too because it was tough holding on to the thermometer (don't try this at home....this was done by a trained professional...rofl).
Then I wanted to know how hot the
Handi-Iron got in comparison to my "Hot Harriet" (my old cloth cord iron made by Westinghouse that I know gets very hot). I'm in love with "Hot Harriet" for fusing because she doesn't have any steam holes on the bottom....which means no marks (little circles) left behind on your fabrics....and you might have noticed the
Handi-Iron doesn't have those either....very cool!
I'm embarrassed to show you "Hot Harriet's" behind....I'll address that issue later.
I put the thermometer up against "Hot Harriet" ...she was set to linen as well.
Up and up the red dial went.....
and it continued to go up.....
Until it stopped back where it started....just like the
Handi-Iron. That's all I needed to know. If this 10 ounce
Handi-Iron gets as hot as "Hot Harriet" then that is enough proof for me....I'll never need anything hotter.
Another feature that impressed me about the
Handi-Iron is the cord....it doesn't get in the way weather you are right or left handed. The other small irons have the cord coming out the side....those flop over on me and I've gotten burned. Excellent engineering in my opinion. There was no excess packaging either....I really, really, really like that!!!
The bottom of the iron is a non-stick surface and I was told it just wipes off if you get fusible on it. So I tested that too....
and now here it is stuck to the bottom of my new
Handi-Iron.....not pretty. You have to admit that no matter how careful you are....some how some way....that fusible gets on your iron...right? Right!! So it's a good idea to know how well the iron cleans up.
This is what the iron looked like after I rubbed it on the fabric. It did not come off....it sort of rolled up a bit. I tried to scrape it lightly with the edge of thin plastic ID badge....and it still didn't come off.
Look how well it cleaned off the fusible... like brand new! :)
So I treated "Hot Harriet" to a sauna as well....don't you think she deserves it? Look how she shines...
.....Faultless Hot Iron Cleaner is the best iron cleaner I've ever used...bar-none...including baking soda and water.
I highly recommend it for travel, workshops, classes and anytime you need a light small iron. Do you need a heated flat pallet for straightening out ribbon? Heat up the Hot Fix Crystals? Check this out...
I took the handle off and plugged it back in.
Then I took this wrinkled ribbon and
pulled it back and forth across the surface of the
Handi-Iron. You can see for yourself....it straightened that ribbon out toot sweet!
I called
Kandi Corp and spoke to Dave, the owner, about the warranty on the
Handi-Iron. There is a one year warranty and they pay shipping if it is defective. You know I loved that....nothing worse than buying something...having a problem and then having to pay more money just to get it replaced. Dave also pointed out that on
Kandi Corp's website there is a place to click in the upper right hand corner and you can have a live chat if you have any questions.
Well, I think I did a good job of running the
Handi-Iron through the necessary tests....I'm giving it 2 thumbs up!!! Money very well spent!!
Smiles,
Kelly